There are industrial applications that require frequent mating cycles throughout life such as measuring/controlling drawer-mounted equipment, molding control equipment, and replaceable tools. Since the connectors of these applications need to be connected and disconnected several times a day, failing to install high-performance connectors with a sufficient mating cycle rating could result in unstable connections with […]
Right-angle BNC designed for pick-and-place assembly
Samtec now offers a 75 Ohm High-Density BNC solution (HDBNC Series) with an exclusive, balanced right-angle design ideal for high volume pick-and-place manufacturing (-BM1D & -BM2D die-cast options). Designed primarily for use in advanced broadcast video equipment, Samtec HDBNC Series was tested to the latest SMPTE 2082 12G-SDI pass/fail specifications, with return loss measurements surpassing […]
Ultra-small coaxial connector supports 5G apps
Hirose has enhanced its compact coaxial connector offering to serve the emerging 5G device market. 5G applications require connectors that can handle higher frequency, and the C.FL Series coaxial connector supports up to 30Ghz in an ultra-small footprint. Measuring only 2 mm x 2 mm with a 0.92 mm mated height, the C.FL Series connector […]
2.5 GHz high-frequency antenna connector employs one-step crimp termination
Hirose has reduced the size of its 2.5 GHz high-frequency antenna connector to offer significant space savings in automotive antenna systems. Employing a one-step crimp termination design, the GT21 Series antenna connector also reduces assembly time and cost. The crimp termination design also enables the cable assembly to be completed without touching the center conductor, […]
Tiny, 0.8 mm-pitch board-to-board connectors target high-density industrial systems
Harwin announces the Archer .8 series. With a 5mm stack height, these dual-row 0.8mm-pitch board-to-board connectors are intended for uses where there is very limited available space and cost-effectiveness is equally important. These include factory automation and environmental monitoring equipment, smart meters, point-of-sales units, servers/data center hardware, and battery management systems in electric vehicles. The […]
NanoRF Edge launch connector eliminates cables
TE Connectivity has introduced the NanoRF Edge Launch connector, the only solution that can integrate the RF above an optical interconnect for military and radar RF embedded computing applications. The NanoRF connector meets the rigorous requirements of VITA 67.3 to provide a simple and standardized interface with VPX plug-in computing modules including RF switches, tuners, software-defined […]
Edge-mount, USB Type-C plug expands design flexibility
GCT’s new edge mount USB Type-C Plug provides design engineers with greater options for docking solutions and plug-in external dongle devices. The USB4155 is mid-mounted to make the best use of the PCB thickness within the profile of the connector. The slim 2.9mm profile offers features on the external metal case that provide excellent EMI […]
Sager Electronics stocking LEMO T series IP68 push-pull connectors
Sager Electronics is now stocking LEMO’s T Series IP68 water-resistant push-pull Connectors. LEMO’s T series connectors are small in diameter, offering water-resistant push-pull multi-pole connectors with IP68 protection. Lined with an inner sleeve that prevents penetration of solids and liquids, and a full 360° full EMC shielding, these connectors are specifically designed for outdoor applications. […]
Modular connectors offer 4P4C, 6P2C, 6P4C, 6P6C, 8P8C, and 8P10C options
CUI Devices’ Interconnect Group announced the addition of modular connectors to its connectors product portfolio. Available in RJ10, RJ11, RJ12, RJ13, and RJ45 types, CUI Devices’ CRJ series of modular connectors offer a variety of position and contact options including 4P4C, 6P2C, 6P4C, 6P6C, 8P8C, and 8P10C. Ideal for networking or telecommunication equipment, these modular connectors offer single port, […]
Kit includes all tools needed for low-low, 50 Ω cable assemblies
The LMR-240 Kit from Times Microwave Systems packs everything needed for low-loss, 50-Ω cable assemblies into one box. The kit contains cables, interconnect components, lubricant to facilitate connector assembly, and even cable cutting tools, including the easy-to-use model CCT-03 tool for exposing and prepping cable center conductors with clean, burr-free cuts ideal for low-VSWR connector […]
