Cinch Connectivity Solutions, a division of Bel Fuse Inc., now offers the C-ENX EN 4644 Modular Rectangular Connector. The series is standardized by the EN 4644 European Standard and is available with electrical and optical interfaces including, Cinch EBOSA Expanded Beam Technology. This series features our patented active alignment technology which aligns a standard LC […]
Aerospace
Jonhon launches hermetic optic-fiber connector for aerospace applications
To meet the requirement and needs of optic-fiber applications in space, Jonhon has developed a new hermetic optic-fiber connector for aerospace applications. The connectors have eight different insert arrangements (from 2 to 32 pins), and the air leakage of the hermetic receptacle is less than 1×10-10Pa·m³/sec (inner and outer pressure difference equal to one standard […]
Amphenol Aerospace introduces the four channel 10G-Base-T to XAUI connector converter
Amphenol Aerospace now offers a new four-channel 10G-Base-T to XAUI connector converter product in addition to its current set of 10GbE products. The product facilitates the bi-directional protocol conversion of four channels of IEEE 802.3 XAUI through the appropriate PHY and transformer logic to IEEE 802.3 10G-Base-T. The product has been developed, integrated, and delivered […]
Flexible busbar system from Amphenol Aerospace minimizes mechanical stress
The new FlexaBIS flexible busbar system from Amphenol Aerospace is designed to minimize mechanical stress on the connectors and components within a power box. It also helps to enhance sealing and reduces space requirements. Its key features and benefits include: Mounts to the customer enclosure with the same screws as the IO connectors High voltage, […]
Molex debuts Impel backplane connectors at DesignCon
Molex, LLC debuted its new Impel Plus Backplane Connectors at the DesignCon 2016 Expo this week. An extension of the Impel Backplane Connector family, Impel Plus connectors include grounding tail aligners and smaller signal compliant pins. An innovative signal beam design improves insertion loss compared to in-line beams and pushes interface resonance frequency past 30 […]
CDM Now distributes Amphenol PCD Luminus Series of connectors for aerospace applications
CDM Electronics, a premier authorized distributor of electronic connectors and cables, now distributes the Amphenol Pcd Luminus Series of interconnect solutions engineered to support highly reliable low-to-moderate-power and communication signal transmission in military and commercial aerospace applications. The lightweight, cost-effective series comprises a range of connectors, receptacles, contacts and accessories in various configurations and arrangements […]
Triple-wire sealed connectors perform in harsh environments
TE Connectivity announces the launch of its DEUTSCH AFD Series connectors that feature bayonet coupling and rear release contacts in a miniature circular connector system with sealing. These connectors are frequently used in aerospace applications and military ground vehicles, and are MIL-DTL-26482 Series II-qualified. The DEUTSCH AFD Series connectors are built to perform well in […]
Bendix connectors keep planes flying with new bristle brush design
Some connector applications put a high priority on very low mating forces. Examples include: Connectors with very high numbers of conductors Insufficient room in a system for injector/ejector hardware Awkward position inside the box that does not permit the operator to apply a lot of force Bendix Connector Corp., now absorbed into the Amphenol Military-Aerospace […]
AMPLIMITE connectors that meet IP67 levels now available
TE Connectivity (TE), a manufacturer in connectivity, announces its new AMPLIMITE IP67 D-subminiature connectors meet IP67 performance levels. Designed to meet MIL-DTL-24308 specifications, the new connectors have an environmental sealing that has been successfully tested at a submerged depth of one meter and have water and dust ingress protection to IP67. “We’re continually striving to […]
TE Connectivity’s lightweight terminations for aerospace reduce weight up to 60%
TE Connectivity (TE), Harrisburg, Pa., announces its new COPALUM Lite sealed terminals and splices that provide up to 60% in weight savings versus copper terminal alternatives, and up to 53% weight savings versus drop-forged aluminum terminals. The new terminals feature the time-tested dry crimp technology that has provided three decades of reliable connectivity to the […]
