TE Connectivity has introduced its new Sliver straddle-mount connectors, which are the new standard form factor supporting a faceplate-pluggable Open Compute Project (OCP) NIC 3.0. A new extension of the Sliver product line, these straddle-mount connectors were designed to be useful for OCP NIC 3.0 cards in a low profile for ease of system maintenance […]
QSFP-DD connectors, cages and assemblies support 400 Gbps speeds
TE Connectivity has introduced its new Quad Small Form Factor Pluggable Double Density (QSFP-DD) connectors, cages and cable assemblies, which address next-generation data center needs by increasing density through an existing QSFP form factor to reach speeds up to 400 Gbps. This 8 lane solution is designed for both 28G NRZ and 56G PAM-4 protocols, […]
Taking on the challenge of managing power through connector design
While requirements for power supplies have been steadily increasing, the need to address space and heat limitations is taking on greater importance for modern connector design. Contributed by Ken Stead, director, power products, Molex Today, across the world, there are nearly 90 million internet transactions conducted per minute, or 1.5 million occurrences each second. All […]
USB 3.0 Type-A connector available in vertical design for up to 5 Gbps
Stewart Connector, a Bel group co., announces the addition to the USB 3.0 Type-A connector product offering with the release of a USB 3.0 Type-A vertical connector. Stewart USB connectors are designed to support data speeds up to 5 Gbps for USB 3.0. The USB Type-A connector design has plug/play capabilities where hot insertion/ejection may […]
Miniature RF connector system deliver high frequency, low PIM
Molex, Lisle, Ill. has introduced a compact 2.2-5 RF connector system and cable assemblies designed to deliver high frequency and low passive intermodulation (PIM). In conjunction with the 2.2-5 consortium, Molex developed the 2.25 form factor by adapting and miniaturizing the proven 4.3-10 form factor. Molex 2.2-5 RF connectors are 53% smaller than 4.3-10 connectors, […]
New Cat6/Cat5E RJ45 modular plug reduces assembly, termination time
Stewart Connector has released the Qwik Cat6/Cat5E RJ45 modular plug to complement its extensive RJ45 modular plug offering. Stewart’s Qwik RJ45modular plugs are designed to be terminated to industry standard Cat5E and Cat6 cables, while reducing assembly time and improving termination quality in the field. Unlike the standard RJ45, the Qwik RJ45 allows cable conductors […]
ERFV RF coax connectors from enable 5G wireless designs
TE Connectivity has introduced its new ERFV RF coax connectors for 5G wireless applications. The new solutions are being showcased in an active antenna display at TE’s booth (Hall 82, Booth 225) at the Electronica this week in Munich. Future 5G wireless equipment designs will require a new level of highly reliable and customizable components, […]
High-frequency nanominiature contact for embedded computing
TE Connectivity has released its new NanoRF modules and contacts, which double the density of today’s VITA 67 RF modules for VPX embedded computing applications. This high-frequency nanominiature coax contact is engineered with smaller contacts and a higher RF contact density within a multi-position module. This design enables smaller packaging and saves valuable space. Half-size […]
ix industrial Ethernet connector, miniature replacement for RJ45 designs
The RJ45 connector has been the standard Ethernet interface in IP20 environments for many years. However, as the demand for smaller devices and sensors increases, the RJ45’s size limits the potential for miniaturization. This is why HARTING developed the ix Industrial Ethernet connector, which is a smaller and more rugged connector than the standard RJ45. […]
OSFP connectors and cable assemblies from TE Connectivity offer 400 Gbps
TE Connectivity has introduced its new Octal Small Form Factor Pluggable (OSFP) connector and cable assembly portfolio, which supports next-generation data center needs with data rates of 200 and 400 Gbps. These products are designed to support 8x28G NRZ and 8x56G PAM-4 protocols, with a roadmap to 8x112G PAM-4 for future system upgrades. TE’s OSFP […]
- « Previous Page
- 1
- 2
- 3
- 4
- …
- 9
- Next Page »
