Molex Inc., Lisle, Ill., has developed the compact zCD interconnect system to support next generation applications in telecommunications, networking and enterprise computing environments. The system will transmit 400 Gbps data rates (25 Gbps over 16 lanes) with excellent signal integrity, electromagnetic interference (EMI) protection and thermal cooling properties.
The zCD interconnect system will be on display at Molex booth 117, DesignCon 2014, January 29-30, Santa Clara, Calif.
Molex zCD connectors will be available in a short body version for passive or active copper cables and long body version for active optical cables (AOCs) or transceivers. The zCD connectors feature a straight, back-route footprint with a 0.75-mm pitch. An elastomeric gasket provides EMI containment and suppression. Designed to accept a broad range of thermal modules and heat sinks, the press-fit connector design ensures a robust and simple board termination.
Providing industry leading bandwidth density, zCD passive copper cable assemblies feature 32 pairs (16 channels) per I/O port at 25 Gbps. A dual paddle-card system improves cross-talk performance through the cable interface. An embedded micro-controller cable-management interface allows custom host-management capabilities through a standard I2C bus. Designed for use with 30 AWG Twinax cable, the passive copper bundle (up to 32 pairs) improves bend radius and flexibility in short-reach 400 Gbps Ethernet or legacy and proprietary applications.
Based on singlemode silicon photonics technology, Molex AOC assemblies for the zCD connector deliver 16 bi-directional channels operating at up to 28 Gbps, or 400 Gbps of bandwidth, in a compact standard interface. A hot-pluggable transceiver allows insertion and removal of devices without powering down the system. Module I/O equalization enables optimization of performance for each host system. Transmitting up to 4 km for a fraction of the cost and power of long-reach optical modules, the zCD AOC assemblies are primarily designed for 400 Gbps Ethernet applications and will function with InfiniBand* and proprietary protocol applications.
Molex is among the founding members of the CDFP multi-source agreement (MSA) consortium, which is dedicated to defining specifications and promoting adoption of interoperable 400 Gbps hot pluggable modules. For information about the CDFP MSA, visit www.cdfp-msa.org.
Molex Inc.
www.molex.com/link/zcd.html
Leave a Reply
You must be logged in to post a comment.