Medical connectors are different because medical applications are different. Medical systems require high reliability like industrial systems, but they have unique challenges where failure or unreliable operation can be life-threatening. A few examples include: Materials qualified for medical connectors are often specified to prevent bacteria growth and ensure that the connection system withstands sterilization or […]
FAQ
What’s the status of EV charging connector standards?
Connectors for electric vehicle (EV) charging are both standardized and changing. On one level, EV charging connectors are standardized based on today’s technology limitations. There are standards in major regional markets, including North America, Japan, the European Union, and China. But current charging technologies are power limited. This FAQ begins with a review of EV […]
How the digital-interface standards for cables and connectors are changing
CoaXPress (CXP) is a popular digital interface standard developed for high-speed transmission of data, videos, and still images. Introduced in 2008, this interface has been used in industrial automation for years, with advanced machine vision and robotics applications following suit. It has been driven by reliability and simplicity, including its cables and connectors. CoaXPress combines […]
How system fabric I/O interface cables and connectors are evolving
Newer fabric network input/output (I/O) cables and connectors support higher speeds, reduce latency, and support the latest interfaces — including the IEEE-802.3df Ethernet 200G per-lane specification project and modified versions, such as the RoCE and iWARP Ethernet. Other new cable and connector developments are working to include standard InfiniBand XDR 200G and modified versions, such […]
How HDD and controller connectors and internal cables are evolving
NVMe Hard Disk Drives (HDDs) are a new storage system product family currently going through development and validation. It’s expected that some of these products will be released in 2023 or 2024. HDDs store memory on a spinning disk and are slower than solid-state drives (SSDs). So, why new HDDs? The new devices are said […]
Where are wire-to-board connectors used?
By Frances Richards Wire-to-board connectors are used to connect a wire or group of discrete wires to a printed circuit board (PCB). These connectors serve as an efficient and cost-effective method for delivering power and signals to PCBs in automotive, industrial, lighting, and communication products. Commercial electronic equipment and household appliances often use wire-to-board connectors […]
Getting one wire to do more, Part 4 – headphone wire as antenna
Using one wire in two very different roles is widely done, requiring some simple circuity and basic components. Using a headphone wire as an FM antenna The earliest portable AM/FM portable radios used two antennas: an internal long wire wound on a ferrite core for the lower-frequency AM band (550-1600 kHz), and a “whip” antenna […]
Getting one wire to do more, Part 3 – Powering the antenna LNA
Using one wire in two very different roles is widely done, requiring some simple circuity and basic components. Providing DC power to an antenna amplifier via an RF coaxial cable In most applications where the antenna is located at a distance from the radio receiver front end, it is desirable or necessary to add a […]
Getting one wire to do more, Part 2 – Phantom power for the microphone
Using one wire in two very different roles is widely done, requiring some simple circuity and basic components. Powering microphones over the audio cable A classic engineering objective is to figure out a way to get one set of wires to provide a second function at little cost. This second part in the series looks […]
Simple double-duty: How to get one wire to do more, Part 1: The rationale
Using one wire in two very different roles is widely done, requiring some simple circuity and basic components. It makes a lot of sense to use an individual single copper cable and its connection between two points to do more than it initially intended, especially if that additional function is aligned with the primary function […]
