For applications driven by sensors more than high-speed data, the IEEE 802.3cg standard offers single-pair Ethernet connectivity with far lower cable costs and bulk. Part 1 looked at the context and standard which defines Single-Pair Ethernet and some of its variations, and how it fits into the IIoT application area. This part will look at […]
Telecom/Data
Card edge power connector portfolio for high current power connection
TE Connectivity (TE) is shaping its card edge power connector portfolio into a comprehensive one with the introduction of single-beam, high-density (HD) heightened, HD plus (HD+) 5- and 8- beam card edge power connectors. The whole portfolio can offer solutions for high-current connections while supporting a slow signal connection. Products within this portfolio are mainly […]
Field-replaceable connectors for military and civil use
Pasternack has just launched a new line of field-replaceable RF connectors designed for use in various civil and military telecommunications, civil and military aeronautics, military equipment, as well as space and measurement system applications. Pasternack’s new field replaceable RF connectors include SMA, 3.5mm, 2.92mm, 2.4mm, and 1.85mm types with 2-hole and 4-hole mounting configurations. Each connector […]
SMP connectors and terminators for high frequency to 20 GHz
Amphenol RF is pleased to announce the expansion of the SMP product series with enhanced performance connectors and the introduction of terminators. SMP connectors are ideal for telecommunications and military applications which require compact, board-to-board RF interconnects. These commercial products utilize the standard SMP interface and provide a high-frequency solution that offers reliable performance up […]
Heilind Electronics expands MagJack ICMs with Marvell-compatible versions
Heilind Electronics has expanded its selection of MagJack Integrated Connector Modules (ICMs) with the manufacturer’s Marvell-compatible solution. The new module is designed for customers using the latest Marvell 10GBASE-T Ethernet PHYs, including the 88E2xxx and 88E3xxx series silicon. It offers a performance upgrade to achieve maximum speed over twisted pair copper cables – up to […]
68-pin SAS connectors for high-speed small computer system interfaces
TE Connectivity introduces receptacles for the fourth-generation serial attached small computer system interface (SCSI) (SAS) supporting both SAS and PCIe lanes at respective speed of 24 Gigabits per second (Gbps) and 16 gigatransfers per second (GT/s). These new 68-pin receptacles are designed to address SFF-8639 specifications with compatibilities to SFF-8630, SFF-8680 and SFF-8432 interfaces. Their […]
Bel Magnetic Solutions introduces Marvell compatible 10GBASE-T MagJack ICMs
Bel Magnetic Solutions, a Bel group company introduces a line of Marvell compatible 10GBASE-T MagJack ICMs. These 10GBASE-T ICMs are ideal for customers looking to upgrade their product performance for maximum speed over twisted pair copper cables, up to ten times over standard Gigabit Ethernet technology. Bel Magnetic Solutions’ Marvell compatible 10GBASE-T ICMs are designed […]
Small form-factor pluggable interconnects provide high density and speed
TE Connectivity has extended its small form-factor pluggable (SFP) product portfolio with new, small form-factor pluggable double density (SFP-DD) products for input/output (I/O) interconnects. The “double density” new cages and surface mount connectors can offer two-channel data transmission, instead of the traditional one-channel in an SFP architecture, which helps data center systems to enable doubled […]
SealJack PCB coupler for harsh environment applications
Stewart Connector, a Bel group company, announces an addition to the SealJack series, with an IP67-rated RJ45 to RJ45 PCB coupler, ideal for harsh environment applications. Stewart’s SealJack PCB Coupler utilizes a shielded right angle RJ45 SealJack, offering an IP67-rated connection when mounting to a box or panel. The SealJack PCB coupler also provides a […]
Cinch Connectivity expands Midwest Microwave commercial grade terminations
Cinch Connectivity Solutions, a Bel group company, announces the expansion of the Midwest Microwave commercial grade series with 2.4 and 2.92 mm terminations. These new Commercial Grade microwave components expand the Midwest Microwave brand from military, space and laboratory markets into the commercial market by offering the best combination of price and performance in high […]
