Heilind Electronics, an authorized distributor for TE Connectivity (TE) recently introduced the manufacturer’s new terminal cutter hand tool. The tool enables operators to easily remove side-feed, front-carrier strip and reeled terminals from their carrier strips – and in the process, avoid damaging products or creating sharp burs commonly associated with traditional wire snips. TE Connectivity’s […]
QSFP-DD connectors, cages and assemblies support 400 Gbps speeds
TE Connectivity has introduced its new Quad Small Form Factor Pluggable Double Density (QSFP-DD) connectors, cages and cable assemblies, which address next-generation data center needs by increasing density through an existing QSFP form factor to reach speeds up to 400 Gbps. This 8 lane solution is designed for both 28G NRZ and 56G PAM-4 protocols, […]
Heilind Electronics offers JAE’s new board-to-board connectors
Heilind Electronics, an authorized distributor for JAE Electronics in North America, has recently added the manufacturer’s AC01 Series connectors to its extensive inventory of interconnect products. The new connectors feature a 0.5mm contact pitch and 2.5mm to 3.0mm stacking height to accommodate today’s smaller and thinner applications. In addition, the connectors offer a highly stable […]
Heilind Electronics now stocking backshells and dust caps from Amphenol Pcd
Heilind Electronics is now stocking the manufacturer’s circular connector backshells and dust caps. These products are compatible with a variety of MIL-SPEC connector series, including MIL-DTL-5015, MIL-DTL-26482, MIL-DTL-38999 and MIL-DTL-83723. Amphenol Pcd’s backshells provide strain relief, environmental protection and EMI/RFI shielding at the termination area of virtually any connector. These backshells are available in both […]
Heilind Electronics now stocking Harting’s new Han-Eco B series connector hoods and housings
Heilind Electronics is now stocking Harting’s Han-Eco B — a new product series within HARTING’s Han-Eco interconnect family. Compared to its metal-case counterparts, the Han-Eco B series of connector hoods and housings provides an enhanced level of functionality to the industry-standard Han B line. Advanced features include the option of rear mounting the internal cable […]
Harwin ultra-compact EMI/RFI shield clips for space-constrained electronic designs
Covering a surface area of just 2.3mm x 1.2mm and with a 2mm height, Harwin’s S0911-46R shield can clip is the smallest surface mount EMI/RFI shield clip currently available on the market. Consequently, it is much better at addressing the demands being set by the latest generation of high-density electronic systems. This ultra-compact component, which […]
Heilind now stocking Molex connector system
Heilind Electronics, a premier distributor of electronic components worldwide and the largest distributor for Molex, is now stocking the manufacturer’s PicoBlade connector system with gold plating. The PicoBlade terminal’s two-point contact design delivers a secure electrical connection, even under low-current, low-voltage and high-vibration conditions. The crimp receptacle features two latching ramps to minimize uncoupling due […]
Cable assemblies added to interconnect portfolio
CUI’s Interconnect Group announced the addition of USB cables to its existing cable assembly products. The USB cable assemblies come available with USB Type A, USB Type B, Micro B, Mini B, and USB Type C plugs and receptacles, along with dc power plugs, blunt cut, and stripped and tinned terminations. Joining CUI’s line of ac […]
Waterproof USB Micro B and Type C receptacles feature IP67 ratings
CUI’s Interconnect Group announced the addition of several waterproof USB connectors, with Ingress Protection (IP) ratings of IP67, to its USB product family. Offering protection from moisture and environmental contaminants, the connectors are available in USB Micro B and Type C receptacle formats, while conforming to either the USB 2.0 or USB 3.1 Gen 2 […]
Integrated connector modules specifically designed for industrial Ethernet apps
A MagJack Integrated Connector Module (ICM) is specifically designed for Industrial Ethernet applications. All variants meet the IEEE 802.3 10/1000Base-T and 1GBase-T electrical requirements including RL, IL, Hi-pot and Common Mode parameters. TRP Connector Industrial Ethernet MagJack ICMs satisfy the growing demand for integrated connectors used in operating robots and machines, on the factory floor. […]
- 1
- 2
- 3
- 4
- Next Page »
@ConnectorTips
EE World Online
YouTube
Instagram