Binder USA LP, launched the 818 series M8 D-coded field-attachable, molded cordset and panel mount connectors. The new 818 series is ideal for Industry 4.0 use in automation, sensors, test and measurement, and industrial Ethernet applications. The M8 D-coded connectors are available with four gold-plated contacts rated for 63 Vdc at 4 A, suitable for […]
M12-A connectors with plastic threaded rings for factory control
Binder USA LP launches new series 763 M12-A connectors with plastic threaded rings. The IP68-rated male and female cable connectors are available with 3, 4, 5, 8 or 12 gold- plated contacts in a molded UV-resistant nylon (PA) housing. The plastic connectors offer a lightweight, cost-effective solution for use in factory control systems and electrical […]
Snap-in IP67 distributors for factory control and electrical equipment
Binder USA LP launches the new IP67 rated Snap-in Distributor in both 4 and 6 position connections. Each version is available with 3 or 5 gold plated contacts and is offered in a ready to use cabled version or pluggable module. The distributors allow for expansion of the 720 series connectors and is ideal for […]
M16-X 415 series male/female cable and panel mount connectors
Binder USA LP introduces the new M16-X connector, Series 415, an 8-contact male/female cable connector for high-speed data transmission with shielding to protect signal integrity, and IP67-rated ingress protection to withstand harsh environments. The M16-X has a rated voltage of 50 Vac/60 Vdc and is available with an optional female panel mount connector. The 8 […]
Binder USA debuts new products for the Smart Factory and IIoT at ATX West
Binder USA LP will exhibit its latest products for Industry 4.0 at the Automation Technology Expo (ATX) West, February 11-13th, at the Anaheim Convention Center. Throughout the show, binder will unveil exciting new products, such as the 670 subminiature bayonet-style connector, M8 cordsets and panel mounts with 12 pins, and female M12 X code field […]
M12 L-coded connector for dc power supply applications
Binder USA LP has released the series 813 M12 L-coded male cable connector. With Profinet-compliant plastic housing, this field-wireable connector is ideal for dc power supply applications up to 63 V/16 A. This connector is a panel-mount connector with single wires. (Standard wire length is 200 mm; other lengths are available upon request.) The screw […]
Snap-in IP67 twin distributor for miniature circular connectors
Binder USA LP has added to its 720 series of miniature circular connectors with a new snap-in IP67 twin distributor. The new twin distributor — a single male connector into two female connectors — provides a welcome new option for designers and installers who need a miniature circular connector for today’s machine building and automation […]
Rear panel-mount IP67 connector for medical, industrial applications
Binder USA LP, Camarillo, Calif., has extended its series 770 NCC product line with the introduction of a female panel-mount connector. It is mounted from the back side of a panel and fastened from the front with a hex nut. binder’s NCC connectors are IP67-sealed when unmated. When the panel-mount connector is mounted it can […]
M8, M12 and 7/8 in. connectors make up custom cordsets
Binder USA LP offers custom M8, M12 and 7/8 in. sensor cordsets to provide OEMs with the ideal cable length and connector type for virtually any application. Options include single-ended and double-ended versions with straight or right-angle connectors. A variety of cable types, colors, and lengths can be used in combination with M8, M12 and […]
Binder USA expands M12 family with K- and L-coded power cable and panel-mount connectors
Binder USA LP has expanded its M12 product family with the addition of the M12–L, a dc power supply Profinet compliant connector, and the M12-K, an ac power supply connector. The cordsets are ready to mount with preassembled male and female panel mount connectors. M12 power connectors are commonly used for industrial networks in process and […]
